Teenage Engineering POM-16 Home-Build Stand-Alone Keyboard With Tuneable Keys & Sequencer

The POM-16 is a home-build stand-alone keyboard with individual tuneable keys and a programmable step sequencer.

Each kit comes with all of the parts needed to build the project. Included in these flat packed synthesizers are everything from a powder coated aluminium chassis to an illustrated build guide with instructions and bend angles. When bending is complete, snap the wire connectors and finalise your build with knobs and rubber feet. Remember, think twice and double-check the angles before bending.

Note: The unit is designed to send CV, Gate, MIDI, and PO Sync to control the POM-400 or other synthesizers. These signals do not make sounds.

Note: There is no power supply included. If you want to run the units on wall power you need an adapter with the following specifications (sold separately):

AC/DC adapter 12V, min 1A (12 watt) Polarity: center negative Plug: 4.75/1.7mm Warning: Make sure to remove the batteries from the battery holder before connecting the DC-plug to the external AC/DC adapter.

Use separate battery charger to charge re-chargeable batteries.

Highlights

• Powder-coated Aluminium Chassis
• Keyboard and Sequencer
• Stores up to 64 patterns
• Battery power option
• Power supply sold separately

Technical Specifications

• 1 x POM-16 chassis
• 1 x Keyboard
• 16 x Trim Knob
• 1 x Value Knob
• 4 x Rubber Foot
• 4 x Chassis Screw
• 1 x Screwdriver
• 1 x User's Manual