- Additional Information
sE Electronics USB2200A USB Condenser Microphone Product Description
The sE Electronics USB2200a is a USB2 microphone based on the studio standard sE2200a capsule.
The sE Electronics USB2200a records CD quality audio (record path16 bit 48K, output 24 bit 48K) via USB directly to your DAW. The mic has several features unique from USB mics currently on the market including, ultra-low latency headphone monitoring (less than 1ms) with mix control to allow the user to set playback versus record path levels to monitor live takes, 10dB pad, Bass cut and an ‘analogue switch’ which enables the user to use the mic via an XLR connector with 48v phantom power where required. This feature adds flexibility of use to the mic, and means that whatever changes may occur to digital recording technology in years to come, the mic can still be used in ‘analogue mode’, unlike it’s competitors.
In addition, the SE Electronics USB2200a has proprietary chips, developed by sE Electronics International, which deal with both noise and software driver problems faced by competitor products. One chip helps with transforming the 5v power supplied via the USB cable to power the capsule, by first removing ‘noise’ and undesirable spikes from the current. This ‘noise’ would normally be amplified, which is why USB mics have, until now, been largely too noisy to use in a professional environment. No other USB mic on the market offers this kind of specification, and it makes a huge difference to the performance for studio use. Most manufacturers market their USB mics as ‘Podcasting mics’ for this reason. The second proprietary chip has all the appropriate software drivers embedded for use with any DAW, so the product really is ‘plug in and play’, automatically configuring to the host as it is connected.
sE Electronics USB2200a Condenser Microphone Features:
- Frequency Response: 20Hz-20KHz
- Sensitivity: 14.1mV/Pa -37 ± 1.5dB
- Polar Pattern: Cardioid
- Impedance: = 200 Ohms
- Equivalent Noise Level: 17dB(A weighted)
- Max SPL for 0.5% THD@1000Hz: 125dB
sE Electronics USB2200A USB Condenser Microphone Additional Information
|Microphone Impedance||200 Ohms|
|Microphone Sensitivity||14.1mV/Pa -37 ± 1.5dB|
|Circuit Type||Solid State|