- Additional Information
- Alternative Products
sE Electronics sE4400A Matched Pair Product Description
A Must-have Stereo Mic Set for Stage and Studio!
A perfect all-around set of condenser mics! Put sE Electronics' sE4400a matched pair of condenser mics above a drum kit, on a piano, in front of an orchestra, or anywhere else you need perfectly matching stereo sound and you won't be able to help but be impressed by the results. Using a twin-diaphragm design, each of these sE4400a microphones sports cardioid, hypercardioid, omni, and figure 8 polar patterns, letting you put this black beauty to work doing just about anything. While the sE4400a takes its cues from the sE2200a, the sE4400a spent nearly two years being tested in professional studio and broadcast facilities around the world to make sure it was truly an all-around sucess. Now with this matched pair of sE4400a condenser microphones, you get the same versatility and awesome sound quality established by the sE4400a, but in stereo!
Super-versatile microphones by design!
Even a perfectly matched set of condenser microphones is only truly useful if the mics are easy to position. That's why sE Electronics created the sE4400a to be as flexible as possible. The sE4400a is one of the smallest large-diaphragm mics around, letting you slip into places most mics can't go. Plus, the flat-fronted sE4400a lets you get right up on a grille cloth for an up-front sound. Each sE4400a comes with a unique shock mount which allows you to fit the mounted mic into tiny spaces, or invert the shock clamp to extend the mic fully outside the shock mount for close mic-ing applications or vocals. And to make this matched set of sE4400a microphones even more versatile, sE even includes a hand stereo mounting bar in addition to a pair of killer shock mounts and a custom flight case.
sE Electronics sE4400a Matched Pair of Condenser Microphones Features:
- A perfectly matched set of amazing multipattern condenser microphones
- Frequency Response: 20Hz-20KHz
- 10/20dB pads
- Sensitivity: 14.1mv/pa-37db +/- 1dB
- Polar Pattern: Cardioid, Figure 8, Omni, supercardioid
- Impedance: less than or equal to 50 Ohms
- Equivalent Noise Level: 17dB (A weighted)
- Max SPL for 0.5% THD@1000Hz: 130dB
- Connector: 3-pin
- Includes a pair of custom shock mounts, a stereo mounting bar, and a road-ready flight case
- Requires +44V to +52V phantom power
Above a drum kit, on piano, in front of an orchestra, and much more, the sE Electronics sE4400a Matched Pair can do it all!
|Microphone Type -||Condenser|
|Mono/Stereo -||Stereo Pair|
|Polar Pattern -||Cardioid, Supercardioid, Omni, Figure-8|
|Diaphragm Size -||1" (25.4mm)|
|Frequency Response -||20Hz-20kHz|
|Max SPL -||130dB|
|Output Impedance -||50 ohms|
|Self Noise -||17dB (A weighted)|
|Low Cut Filter -||60Hz, 120Hz|
|Pads -||-10dB, -20dB|
|Weight -||0.6 lbs.|
|Included Accessories -||Shock Mounts, Stereo Bar, Case|
sE Electronics sE4400A Matched Pair Additional Information
|Microphone Impedance||<50 Ohms|
|Maximum SPL||130 dB|
|Microphone Sensitivity||14.1mv/pa-37db ± 1dB|
|Polar Pattern||Cardioid, Figure 8, Omni-Directional, Super-Cardioid|
|Circuit Type||Solid State|