Lewitt MTP 840 DM Dynamic handheld microphone with clean sound and switchable gain settings. 

Give your signal some extra gain.

Boost your signal by up to 12 dB via a phantom-powered amplifier in Active Mode for ear-catching realism and distortion-free sonic depth.

Plug in and rock. No EQ required.

We tailored the frequency response to make your vocals cut through even the densest mix, with great presence and clarity.

Plus, you do not require an EQ to be heard. Just plug it in and perform.

Improve clarity.

Remove the mesh, and you'll find switches to activate a low-cut at 150 Hz or 250 Hz to reduce structure-borne noise. You can tame the proximity effect and adapt the mic to your individual preference.

Be fully protected against feedback.

The supercardioid polar pattern allows for high gain before feedback and guarantees maximum isolation of your voice - side and rear sounds are effectively rejected.

Highlights

• 4Dynamic vocal microphone
• Active mode to boost sensitivity
• Tailored vocal sound
• Low-cut settings
• Supercardioid pattern

Technical Specifications

• Type
• Dynamic, moving coil
• Acoustical operating principle
• Pressure gradient transducer
• Polar pattern
• Supercardioid
• Frequency range
• 40 ... 18,000 Hz
• Sensitivity
• 3.5 mV/Pa, -49 dBV/Pa
• Signal / noise ratio
• 75 dB (A)
• Equivalent noise level
• 19 dB (A)
• Dynamic range, passive mode
• 135 dB
• Dynamic range, active mode
• 121 dB, 0 dB gain
• 115 dB, 6 dB gain
• 109 dB, 12 dB gain
• Gain settings, active mode
• 0 dB, 6 dB, 12 dB
• Low-cut filter
• linear
• 150 Hz (12 dB/oct)
• 250 Hz (12 dB/oct)
• Internal impedance
• 600 Ω
• Rated load impedance
• 1,000 Ω
• Supply voltage
• 48 V ± 4 V
• Curent consumption
• 5.5 mA
• Connector
• Gold plated 3-pin XLR
• Microphone dimensions
• 51 dia. x 183 mm, 2 dia. x 7.2 in
• Microphone net weight
• 336 g, 11.85 oz