Revolutionary Engineering
Developed with a special transducer specifically made for the TLM 107, the microphone delivers truly incredible impulse fidelity and a consistently fantastic sound across all five polar patterns. These five polar patterns include omnidirectional, cardioid, hypercardioid, wide-angle cardioid and figure-8 for a truly versatile performance. The sound of the TLM 107 always remains balanced with a linear reproduction of up to 8kHz and a high-cut boost. Ideal for vocal applications, the grille has been optimised for low sensitivity pop sounds for a clear vocal capture.
Pure Sound Reproduction
With transformerless circuitry, the TLM 107 allows for a high degree of linearity and outstanding dynamic range. A self-noise of 10 dB-A ensures extremely low noise whilst a maximum SPL of 141 dB SPL can be increased even further to 153 dB via the pre-attenuation pad. This option allows the microphone to record loud instruments without experiencing distortion. Three low-cut settings of linear, 40Hz, and 100Hz adapt to different recording environments from regular bass tones through to speech and vocal applications.
Highlights
- Five directional polar patterns Large-diaphragm microphone
- Sound free from colouration
- Low self-noise
- Ideal for studio, broadcasting & demanding home recording applications
- Specifically developed sound transducer
- Balanced sound over entire frequency range
- Acoustically optimised grille
- Maximum sound pressure level of 141 dB SPL
- Includes elastic suspension mount
Technical Specifications
- Acoustic Operating Principle: Pressure Gradient Transducer
- Directional Pattern: Omnidirectional, Wide Angle Cardioid, Cardioid, Hypercardioid, Figure-8
- Frequency Range: 20Hz - 20kHz
- Sensitivity At 1kHz Into 1kΩ: 11 mV/Pa
- Rated Impedance: 50Ω
- Rated Load Impedance: 1kΩ
- Equivalent Noise Level, CCIR: 22 dB
- Equivalent Noise Level, A-Weighted: 10 dB-A
- Signal-To-Noise Ratio, CCIR: 72 dB
- Signal-To-Noise Ratio, A-Weighted: 84 dB
- Maximum SPL For THD 0.5 Percent: 141 dB
- With Preattenuation -6 dB: 147 dB
- With Preattenuation -12 dB: 153 dB
- Max Output Voltage For THD
- Power Supply: P48
- Current Consumption: 3.2 mA
- Required Connector: XLR 3-Pin Female
- Weight: 445 g
- Dimensions
- Diameter: 64 mm
- Length: 145 mm
Whats In The Box
- 1 x Neumann TLM 107 in Nickel
- 1 x EA 4 Elastic Suspension
- 1 x Operating Manual
