Mackie PPM1012 12-Channel 2 x 800W Powered Mixer

Ultra-lightweight, immensely powerful and equipped with the tools to get the perfect sound anywhere without breaking your back. Each model features dual Mackie-designed Class-D Fast Recovery™ amplifiers which provide the kind of power required for modern speakers, 32-bit RMFX+ “Gig Ready” FX and premium Mackie mic preamps for the ultimate powered mixer.

Optimal Performance

Premium Mackie preamplifiers ensure transparent, low-noise/high-headroom characteristics right at the front of the mixer. True 48V phantom power allows every condenser mic to perform at its full potential. Individual channel inserts and dedicated in-line compressors add even more ways to fine tune your mix.

"Gig Ready" FX

The RMFX+ processor features 24 solid FX that are known for their utility and usability. Small, medium and large room reverbs with the choice of a warm or bright characteristic put your mix in the right space. Simple, rich choruses and an array of practical delays with tap tempo enable you to create

Reliable Power

Every PPM mixer features two ridiculously robust Class-D power amps for Mains and Monitors designed for maximum efficiency and minimum heat, delivering 95% of power straight to the speakers. Fast Recovery™ circuitry eliminates the risk of pesky amp latching. And to help protect your speakers, we’ve included a built-in internal limiter that rival many outboard limiters available.

Fine Tune Your Mix

Designed for maximum tonal control in a live sound environment, the legendary Mackie 3-band active channel EQ, with up to 15dB boost/cut capability per band, provides more tone-sculpting latitude than any other mixer in its class.

Absolutely Armored

The PPM Series Mixers are "Built-Like-A-Tank", armored inside a solid steel chassis that helps protect the electronics from any potential environmental hazard (think beer). Extremely durable polycarbonate ABS end caps (PPM608 &PPM1008) will protect the mixer from years of abuse

All The Bells And Whistles

Dedicated In-line Compression provides increased presence and punch for vocals and instruments. Plus, features like 2 built-in DI boxes for direct instrument connections, dual 7-Band GEQ on the Mains and Monitor outputs provide the tools any engineer needs to create a solid mix.

Highlights

• Eight mic/line mono inputs and two stereo line inputs with 4-segment LEDs
• Mackie high-headroom, low-noise mic preamps with
• RF rejection and switchable 48V phantom power
• Six dedicated In-line Compressors
• 3-Band channel EQ with a Mid sweep (100 Hz – 8 kHz) on mono channels and 4-band EQ on stereo line channels 9/10 and 11/12
• DI inputs for direct instrument connections on
• channels 7 and 8
• Four aux sends – two Mon and two FX
• Dual 9-Band graphic EQs on the Mains and Monitor outputs
• Mono output with level control and low pass filter adjustable from 75 Hz – 100 Hz
• 3-Mode two-channel Amplifier, switchable as Mains
• Stereo L/R, Mono Mains/Monitor 1, or Mon 1 and Mon 2
• Precision Passive EQ for enhanced clarity and low-frequency response with Mackie passive loudspeakers
• 12v BNC lamp Jack
• Built-like-a-tank metal chassis with a handle built into the front of the mixer for easy transport
• Rack ears included
• Lightweight and portable (29 lb / 13 kg)

Technical Specifications

• Equivalent Input Noise (EIN), mic input, 150
• source impedance,
• 20 Hz to 20 kHz
• –128 dBu
• (1 kHz, 30 kHz bandwidth)
• Main mix level down, all channel levels down
• –95 dBu
• Main mix level 0 dB, all channel levels down
• –89 dBu
• Main mix level 0 dB, all channel levels 0 dB
• –84 dBu
• Gain
• Mic mono input
• 0 dB to +50 dB
• Line mono inputs
• –20 dB to +30 dB
• Line stereo inputs
• –20 dB to +20 dB

• Mic mono input (+0 / –3 dB)
• Line mono inputs (+0 / –3 dB)
• Line stereo inputs (+0 / –3 dB)

• (1 kHz, 30 kHz bandwidth)
• Mic mono
• <0.003%
• Line mono
• <0.005%
• Line stereo
• <0.003% at main out

• Mic mono input
• +21 dBu minimum gain
• Line mono inputs
• +21 dBu
• Line stereo inputs
• +21 dBu

• Preamp main and monitor outputs
• +21 dBu

• (Both channels loaded and driven at 1 kHz)
• Peak output power @ 4
• 2 x 800 W peak
• RMS output power @ 4
• 2 x 400 W rms, 1% THD
• 2 x 500 W rms, 3% THD
• RMS output power @ 8
• 2 x 250 W rms, 1% THD
• 2 x 300 W rms, 3% THD
• Recommended load impedance
• 4 – 8
• per channel

• High Shelving (all channels)
• ±15 dB @ 12 kHz
• Mid Mono Channels
• Mid Peaking, sweepable
• ±15 dB
• Mid sweep range
• 100 Hz to 8 kHz
• Mid Stereo Channels
• Hi Mid Peaking
• ±15 dB @ 2.5 kHz
• Lo Mid Peaking
• ±15 dB @ 400 kHz
• Low Shelving (all channels)
• ±15 dB @ 80 Hz
• 9-Band Graphic EQ
• ±15 dB @ 63, 125, 250, 500,
• Main and Monitor 1
• 1k, 2k, 4k, 8k and 16 kHz

• Processor
• Two 32-bit
• I/O
• Mono input / Stereo output
• Number of presets
• 24

• Mic mono input
• 3.6 k
• balanced
• Line mono input
• 20 k
• balanced
• Line mono input, Ch 7, 8 Hi-Z
• 500 k
• unbalanced
• Line stereo inputs
• 20 k
• balanced
• Main and monitor outputs
• 240
• balanced
• 120
• unbalanced

• US
• 100 – 120 VAC, 50 – 60 Hz, 250W
• EU
• 200 – 240 VAC, 50 – 60 Hz, 250W
• AC Connector
• 3-pin IEC 250 VAC
• Operating Temperature
• 0 ̊ – 40 ̊C
• 32 ̊ – 104 ̊F

• Height
• 5.2 in / 133 mm
• Width
• 17.4 in / 442 mm
• Depth
• 19.2 in / 487 mm
• Net Weight
• 29.0 lb / 13.2 kg