The Audio technica AT4053b consists of two modular subassemblies: an AT4900b-48 body and an AT4053b-EL hypercardioid head capsule (both available separately). Additional interchangeable capsules are available in omnidirectional (AT4049b) and cardioid (AT4051b)
This versatile studio performer may be used with confidence in a wide variety of professional miking applications. Featuring direct-coupled balanced outputs for clean signals in high-output conditions, the microphone is totally free of the distortion associated with conventional transformer-coupled outputs. And its fast response to transients contributes to the open, transparent reproduction of even the most difficult-to-capture instruments. The microphone is fully RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS).
Highlights
- Specially engineered to meet the most critical acoustic requirements of professional recording, broadcast and sound reinforcement
- Hypercardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
- Direct-coupled, balanced output results in a clean signal even under high-output conditions
- Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
- Switchable 80 Hz hi-pass filter and 10 dB pad
- Rugged turned-brass microphone housing for enduring dependability
- State-of-the-art design and manufacturing techniques ensure compliance with A-T’s stringent consistency and reliability standards
- RoHS-compliant – free from all substances specified in the EU directive on the reduction of hazardous substances (RoHS)
Technical Specifications
- Microphone Type: Condenser
- Polar Pattern: Hypercardioid
- Frequency Response: 20 Hz - 20 kHz
- Sensitivity: -34 dB
- Impedance: 50 ohms
- Maximum SPL: 145 dB
- Signal To Noise Ratio: 78 dB
- Power Requiremnets: +48V Phantom Power
- Connection: 3 Pin XLR (Male)
Whats In The Box
- Audio Technica 4053B
- AT8405a stand clamp for 5/8"-27 threaded stands
- Windscreen
- Protective carrying case
Dimensions
- Width: 155 mm
- Height: mm
- Depth: 21 mm
- Weight: 0.126 Kg
